
PP Processing Solution
Product Code: SLI300MB | Dosage: 1%
SLI300MB PP MFI Enhancer from Shubh Labh International Pvt. Ltd. is an additive designed to increase the melt flow index of polypropylene. It helps processors adjust low-flow virgin or recycled PP towards the flow required for injection moulding, extrusion and compounding.

Overview
Melt Flow Index (MFI), also called melt mass-flow rate (MFR), expresses the mass of molten polymer passing through a standard die in 10 minutes under a specified temperature and load. It is reported in g/10 min.
For PP tested under the same conditions, a higher MFI generally indicates easier melt flow. The target should suit the process and finished product: good mould filling matters for thin-wall and large injection-moulded articles, while extrusion also requires suitable melt strength.
SLI300MB is a PP MFI enhancer. Select the dosage through trials using the starting MFI, required MFI and application. MFI alone does not establish impact strength, tensile strength or product quality.
Technical Data Sheet
View or download the product specifications, dosage, physical forms, MFI test conditions and storage information.
View TDS (PDF) Download TDSMFI Control
When polypropylene is too viscous for the intended process, mould filling and extrusion can become difficult. SLI300MB is designed to improve melt flow so the material can be matched more closely to the application. It can be evaluated for recycled film and raffia conversion, thin-wall containers, buckets, plastic chairs, PP-based masterbatch, rope and nonwoven processing, with the final formulation selected through trials.
Helps raise MFI of low-flow PP feedstock into a range more suitable for injection moulding.
Supports more reliable and complete mould filling during fast thin-wall moulding cycles.
Helps fill large moulds and bulky polypropylene components while reducing processing problems associated with low flow.
Helps provide more consistent extrusion flow when processing recycled polypropylene feedstock.
Supports dependable processing of large injection-moulded polypropylene components.
Helps even out variability in incoming recycled material and supports more consistent batch-to-batch flow.
Processing Benefits
Industrial Application
MFI Enhancer is intended for industrial polymer processors, recyclers and manufacturers working with polypropylene where controlled improvement in melt flow is required.
Final addition level should be selected according to the incoming polymer, starting MFI, desired processing behaviour and finished application.
Use 1% SLI300MB in the total formulation—equivalent to 1 kg additive with 99 kg PP and other ingredients for a 100 kg batch. Mix uniformly and establish suitable processing conditions through trials.
The resulting MFI depends on the starting polymer, formulation and processing conditions. Measure MFI before and after processing under the same test conditions, and confirm the finished product’s mechanical properties and suitability for its intended use.
Applications

Evaluate higher-flow PP for easier filling of thin sections and multi-cavity moulds.

Adjust the flow of PP for large moulded products while confirming the required strength.

Assess flow adjustment for the chosen fibre or nonwoven process using suitable PP feedstock.
Other trial applications include PP masterbatch and compounding, recycled PP rope processing, and conversion of low-flow film or raffia recyclate to injection-moulding feedstock.
Bulk B2B Enquiries
Tell Shubh Labh International Pvt Ltd your polymer type, current MFI, required MFI, application and monthly quantity so the requirement can be evaluated.
Request Price / Technical Details