Performance Additive for Polymer Processing

MFI Reducer

An industrial performance additive for application-specific MFI reduction in HDPE and polypropylene processing where controlled flow, melt strength and processing stability are required.

HDPE Pipe PP Processing Virgin & Recycled Polymer Industrial B2B Supply

MFI Modifier

HDPE MFI Reducer

Product Code: SLI310MB

Control melt flow. Build a more stable extrusion process.

HDPE MFI Reducer from Shubh Labh International Pvt. Ltd. is a performance additive for processors who need to lower the melt flow index of HDPE and improve melt strength. It helps tailor the flow behaviour of virgin or recycled material to the requirements of the finished product, particularly in HDPE pipe extrusion.

When the feedstock flows too easily or recycled batches vary in MFI, achieving a steady extrusion process can be difficult. Our HDPE MFI Reducer is designed to help bring melt flow closer to the required processing range, supporting control over wall formation and product dimensions.

What It Helps You Achieve

  • Lower, controlled MFI: Adjust material flow towards the target required for your application.
  • Improved melt strength: Support the extruded profile as it leaves the die and enters the cooling stage.
  • More consistent pipe formation: Support uniform wall formation and dimensional control.
  • Application-focused performance: Evaluate improvements in toughness and crack resistance alongside melt-flow control.
  • Better use of recycled HDPE: Explore MFI correction for recycled feedstock selected for a suitable end use.

Applications

HDPE pipe extrusion and other HDPE extrusion applications requiring lower melt flow and improved melt strength. Product selection depends on the feedstock, equipment and performance requirements of the finished article.

Dosage and Technical Support

An addition level of approximately 1% can be evaluated as a starting point. The final dosage should be established through processing trials and testing of the finished product. Share your current MFI, target MFI and application with our team to discuss a suitable trial.

For pressure-pipe applications, confirm the required compound and pipe performance through appropriate testing before assigning a pressure rating or service-life claim.

Discuss Your HDPE Application

MFI Modifier

PP MFI Reducer / Impact Modifier

Product Code: SLI303MB   |   Dosage: 2%

Bring polypropylene melt flow closer to your processing requirement.

SLI303MB PP MFI Reducer / Impact Modifier from Shubh Labh International Pvt. Ltd. is an additive designed to reduce the melt flow index of polypropylene while increasing impact strength and toughness. It is intended for virgin and recycled PP formulations that need lower melt flow, improved melt strength and better control during processing.

Recycled PP can vary in flow behaviour between batches. SLI303MB helps processors adjust the MFI towards the range needed for their application, rather than relying only on blending with lower-MFI material. Select the formulation according to the starting polymer, target MFI and required finished-product properties.

Key Benefits

  • MFI adjustment: Intended to lower PP melt flow towards the required processing range.
  • Increased impact strength: Helps improve resistance to sudden loads and knocks, supporting tougher PP products with less brittle behaviour. The improvement depends on the base polymer and formulation and should be confirmed by impact testing.
  • Melt strength: Supports applications where a stronger melt and more controlled flow are needed.
  • Recycling and compounding: Can be evaluated for MFI correction in recycled PP and application-specific compounds.
  • Processing control: Helps tailor material flow to the requirements of the equipment and finished product.

Applications

PP recycling, compounding and extrusion, together with moulding applications where a lower MFI is required. It can also be evaluated for PP products requiring improved impact resistance. Suitability depends on the formulation and the balance of flow, toughness and other properties needed for the finished article.

Recommended Dosage: 2%

Use 2% SLI303MB in the total formulation—equivalent to 2 kg additive with 98 kg PP and other ingredients for a 100 kg batch. Establish suitable mixing and processing conditions through trials. Measure MFI before and after processing under the same test conditions, and check the properties required for your application.

Discuss PP MFI Reducer / Impact Modifier SLI303MB

MFI Modifier

LDPE MFI Reducer

Product Code: SLI321MB   |   Dosage: 1%

A steadier bubble. Stronger film. More productive processing.

LDPE MFI Reducer from Shubh Labh International Pvt. Ltd. is an additive designed to lower the melt flow index of LDPE and improve melt strength in film extrusion. It helps keep the blown-film bubble stable, giving processors better control over film formation and the opportunity to increase production output where bubble instability limits the line.

Benefits in Blown-Film Production

  • Stable film bubble: Improved melt strength helps the bubble maintain its shape and reduces fluctuations during extrusion.
  • Higher production potential: A more stable bubble can allow increased output, subject to the extruder, cooling capacity and required film quality.
  • Improved film strength: Helps support tougher film and better resistance to handling stresses. Confirm the required tensile, tear and impact performance through film testing.
  • Higher filler loading potential: Can help processors evaluate higher filler addition while maintaining workable bubble stability and the required film properties.
  • More consistent processing: Helps adjust melt flow in suitable virgin and recycled LDPE formulations.

Applications

LDPE blown film, bags, liners and filled film formulations where improved melt strength, bubble stability and production efficiency are required. Suitability should be evaluated with the actual polymer blend, filler and processing conditions.

Recommended Dosage: 1%

Use 1% SLI321MB in the total formulation—equivalent to 1 kg additive with 99 kg polymer, filler and other ingredients for a 100 kg batch. Confirm suitable processing conditions and finished-film performance through trials.

Application Trials and Technical Support

Share your starting MFI, polymer blend, current filler percentage, film thickness and output requirement with our team. Establish the addition level through trials and compare bubble stability, production rate and finished-film strength before increasing filler loading or line speed.

Discuss Your LDPE Film Application

MFI Modifier

Nylon MFI Reducer / Impact Modifier

Product Code: SLI380MB   |   Dosage: 1%

Control nylon melt flow and improve toughness.

SLI380MB Nylon MFI Reducer / Impact Modifier from Shubh Labh International Pvt. Ltd. is an additive designed to lower the melt flow index of nylon while improving impact strength. It is intended for processors seeking a better balance of melt-flow control, melt strength and toughness in virgin or recycled nylon formulations.

When nylon feedstock flows too readily or the finished product lacks the required toughness, SLI380MB can be evaluated to bring flow closer to the processing requirement and improve resistance to sudden loads and knocks. Performance depends on the nylon grade, material condition, formulation and processing conditions.

Key Benefits

  • Lower, controlled MFI: Helps adjust nylon melt flow towards the range required for the application.
  • Increased impact strength: Designed to improve toughness and reduce brittle behaviour in suitable nylon formulations.
  • Improved melt strength: Supports applications requiring greater control of the melt during processing.
  • Recycling and compounding: Can be evaluated for flow and impact modification in selected recycled nylon feedstocks and compounds.

Applications

SLI380MB is beneficial in nylon recycling, nylon rod extrusion, compounding and injection moulding where lower MFI and improved impact resistance are needed. In recycling, it helps adjust melt flow and improve toughness in suitable recovered nylon. In nylon rod extrusion, improved melt strength and controlled flow support stable extrusion and consistent rod formation. Evaluate the formulation against the dimensional and mechanical requirements of the finished product.

Recommended Dosage: 1%

Use 1% SLI380MB in the total formulation—equivalent to 1 kg additive with 99 kg nylon and other ingredients for a 100 kg batch. Follow suitable drying and processing conditions for the nylon grade. Confirm the result through MFI and impact testing, along with other properties required for the application.

Discuss Nylon MFI Reducer / Impact Modifier

MFI Modifier

PC MFI Reducer / Impact Modifier

Product Code: SLI391MB   |   Dosage: 2%

Control polycarbonate melt flow and improve toughness.

SLI391MB PC MFI Reducer / Impact Modifier from Shubh Labh International Pvt. Ltd. is an additive designed to reduce the melt flow index of polycarbonate while improving impact strength. It is intended for virgin and recycled PC formulations requiring lower melt flow, improved melt strength and better resistance to sudden loads and knocks.

Key Benefits

  • MFI control: Helps bring polycarbonate melt flow closer to the required processing range.
  • Impact improvement: Designed to improve toughness and reduce brittle behaviour in suitable PC formulations.
  • Melt strength: Supports applications requiring greater control of the melt during processing.
  • Recycling and compounding: Can be evaluated for flow and impact modification in selected recycled PC materials and compounds.

Applications

Polycarbonate recycling, compounding, extrusion and injection moulding where MFI reduction and improved impact resistance are required. Assess suitability for the selected PC grade and finished product, including appearance and optical requirements where relevant.

Recommended Dosage: 2%

Use 2% SLI391MB in the total formulation—equivalent to 2 kg additive with 98 kg polycarbonate and other ingredients for a 100 kg batch. Follow suitable drying and processing conditions for the PC grade. Confirm the result through MFI and impact testing, together with the other properties required for the application.

Discuss PC MFI Reducer / Impact Modifier

Bulk B2B Enquiries

Need Controlled MFI for HDPE or PP?

Tell Shubh Labh International Pvt Ltd your polymer type, current MFI, target MFI, processing application and monthly quantity for application-specific evaluation.

Request Price / Technical Details
call whatsapp WhatsApp Us